Login
Close

Login



SMART CLASSix 48 1U Patch Panel (High Density)

 

  
  • Extremely high density Panel supports 48 ports, using only a rack space height of 1U

  • Compatible with Unshielded Twisted Pairs (UTP) cabling systems

  • Conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E

  • Cable termination using 110 Block termination tools

  • Enhanced cable retention fixture

  • Compatible with 22-26 AWG solid or stranded wire cables

  • High durability and reliability

 

CLASSix™ 
RiT SMART CLASSix STP Patch Panels are part of the RiT SMART CLASSix Cabling SystemTM, featuring Category 6 performance. The system is designed to Conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E. 

  

PatchView™ Capability
SMART CLASSix 24 Panels, when used in conjunction with RiT's PatchView System, can scan the wiring center configuration and subsequently report the connectivity status. 

  

Patching information is displayed on the management station for cabling management and control. 

 

LED indicators on panels identify any two ports patched together. Extremely useful for facilitating maintenance in mid-to-large size wiring centers which are over congested with patch cords. 

 

Computerized LED-display guides the technician in performing Moves, Adds & Changes (MAC). 

SMART CLASSix 48 1U UTP Panel is an innovative patch panel providing a high-density solution, especially designed to save rack and floor space while ensuring top Category 6 performance requirements. Provides RiT's worldwide-recognized PatchView Technology with a real-time cabling management system. 

The SMART CLASSix 48 1U UTP Panel Conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E. Exceeds all Category 6 connecting hardware requirements.

Extraction Tool

The Extraction Tool is especially designed for RiT CLASSix UTP Plug in order to ease the disconnection of patch cords or SMART Jumpers in a high-density environment.
The Extraction Tool should be ordered separately.

 

Interface  

Front Interconnection (patch cords side)
48 nine-position RJ-45 unshielded modular jacks. Use of patch cords with RiT CLASSix RJ-45 plugs is recommended.  

Back Interconnection (cabling side)
48 eight-position 110 tool-compatible blocks; accept 22 to 26 AWG wires, solid or stranded. Rated for up to a minimum of 200 re-termination.  

Note: Termination tools must be ordered separately.  

Interconnection to RiT's PatchView system: 

PVMax Panels - Two 14-pin headers on the back of the panel are used for connectionto the PVMax Scanner.
Use one Group B Scanner Attachment Cord according to the required length 

The scanning signal is transmitted over pin 9 of the RJ-45. Pin 9 exists in nine-position RJ-45 jack and plug designs, used for these patch panel models. A special patch cord - SMART Jumper, including an extra wire and special RJ-45 plugs is needed. Please refer to the PatchView System and the Copper Cables and Cords sections for further details. 

Indicators (in models adapted to PatchView only)
Port identification indicators - 48 red LEDs. Connected ports are identified by a pair of activated LEDs. A single port can be identified and the corresponding LED activated by a remote control command from the network management station 

Electrical Specifications

 

PowerSum NEXT ratio plot is shown for worst pair. The following are typical Power Sum NEXT measurement results at 100, 200 and 250 MHz for all pairs.

Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -60.0 -50.3 -46.4
3-6 -56.3 -48.3 -44.9
4-5 -55.8 -50.6 -48.0
7-8 -58.9 -51.1 -48.3

All pairs exceed Category 6 (draft) requirements.

 

 

NEXT ratio plot is shown for worst pair. The following are typical NEXT measurement results at 100, 200 and 250 MHz for all pairs.

Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 & 3-6 -62.7 -52.5 -48.3
1-2 & 4-5 -63.6 -55.2 -51.9
1-2 & 7-8 -74.8 -61.9 -58.1
3-6 & 4-5 -58.6 -54.1 -51.8
3-6 & 7-8 -63.4 -52.7 -49.7
4-5 & 7-8 -60.9 -57.4 -55.6

All pairs exceed Category 6 requirements.

 

 

PowerSum FEXT ratio plot is shown for worst pair. The following are typical PowerSum Fext measurement results at 100, 200 and 250 MHz for all pairs.
 

Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -47.1 -41.1 -39.3
3-6 -61.1 -48.5 -45.9
4-5 -43.8 -37.2 -35.1
7-8 -46.4 -39.4 -37.2
All pairs exceed Category 6 requirements.
 

 

FEXT ratio plot is shown for worst pair. The following are typical Fext measurement results at 100, 200 and 250 MHz for all pairs.


Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 & 3-6 -71.8 -57.0 -54.5
1-2 & 4-5 --47.1 -41.3 -39.5
1-2 & 7-8 -66.9 -58.3 -55.4
3-6 & 4-5 -68.5 -50.9 -48.1
3-6 & 7-8 -62.4 -54.1 -51.6
4-5 & 7-8 -46.5 -39.6 -37.4
All pairs exceed Category 6 requirements.

 

 

Return Loss ratio plot is shown for worst pair. The following are typical Return Loss measurement results at 100, 200 and 250 MHz for all pairs.
 

Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -37.9 -30.8 -28.1
3-6 -35.9 -27.2 -24.4
4-5 -27.2 -21.0 -19.1
7-8 -41.6 -32.0 -28.6
All pairs exceed Category 6 requirements.
 

 

Insertion Loss ratio plot is shown for worst pair. The following are typical Insertion Loss measurement results at 100, 200 and 250 MHz for all pairs.


Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 0.00152 -0.0557 -0.14
3-6 -0.00594 -0.0623 -0.16
4-5 0.0178 -0.0903 -0.26
7-8 -0.00648 -0.0658 -0.1
All pairs exceed Category 6 requirements.


 

General

 

Physical
Height: 44.0 mm / 1.75" (1U)
Width: 482.6 mm / 19"
Depth: 46 mm / 1.8"
Depth with Cable
Retention Fixture:

97.0 mm / 3.8"
Weight: 0.6 Kg (1.2 lb)

Material
Carbon Steel (SAE 1020)  

 

Colors
Black background with gray silk screened markings 

 

Environment
Temperature:-40° to 85°C
Humidity: 0-90% non-condensing 

 

Compliance with International EMC Standards:
The SMART CLASSix UTP line of patch panels is designed to comply with EN-55022, Class B (Europe) and FCC Part 15, Subpart J, Class A (USA).



Number Description

R3916014

SMART CLASSix UTP Panel, 48 1U, PVMax                  


Contact Us

PVMax & EPV Connectivity Components:

Intelligent Patch Panels

Intelligent Cords & Jumpers 

 

About the PVMax IIM solution 

About the EPV IIM solution 

 

What is IIM

 

Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close

GUI: Grid_1.asp
close