Login
Close

Login



SMART CLASSix 48 STP Patch Panels with Patching Switches


 

  • Dramatically reduces the need for patch cords in normal use by integrating internal mounted Patching Switches

  • A unique innovative technology, for connecting each two vertical ports to each other. Usage of patch cord is only needed for connecting non vertical ports.

  • Meets the transfer impedance standard requirement 

  • Compatible to Shielded Twisted Pairs (STP) cabling systems

  • High performance panel that supports Category 6 performance specifications up to 250 MHz

  • Conform to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E

  • Simple, labor saving assembly and installation

  • Enhanced cable retention fixture

  • Supports 48 ports, using 2U high of rack space

  • Compatible with 22-26 AWG Solid or stranded wire cables

  • High durability and reliability

  • PatchView and non-PatchView options

CLASSix™ 
RiT SMART CLASSix STP Patch Panels are part of the RiT SMART CLASSix Cabling SystemTM, featuring Category 6 performance. The system is designed to Conforms to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E. 

PatchView™ Capability
SMART CLASSix 24 Panels, when used in conjunction with RiT's PatchView System, can scan the wiring center configuration and subsequently report the connectivity status. 

Patching information is displayed on the management station for cabling management and control. 

LED indicators on panels identify any two ports patched together. Extremely useful for facilitating maintenance in mid-to-large size wiring centers which are over congested with patch cords. 

Computerized LED-display guides the technician in performing Moves, Adds & Changes (MAC). 

SMART CLASSix 48 STP Patch Panel offers an innovative high quality patching solution that is made to last. The robust system significantly reduces the need for patch cords while exceeding all Category 6 performance requirements.

The SMART CLASSix 48 STP Patch Panel Provides RiT's worldwide-recognized PatchView™ Technology with a real-time cabling management system and conforms to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E. 

Interface  

Front Interconnection (patch cords side)
48 nine-position RJ-45 unshielded modular jacks. Use of patch cords with RiT CLASSix RJ-45 plugs is recommended.  

Back Interconnection (cabling side)
48 eight-position Krone & 110 tool-compatible blocks; accept 22 to 26 AWG wires, solid or stranded. Rated for up to a minimum of 200 re-termination cycles.  

Note: Termination tools must be ordered separately.  

Interconnection to RiT's PatchView system: 

PVMax Panels - Two 14-pin headers on the back of the panel are used for connection to the PVMax Scanner. Use one Group B Scanner Attachment Cord according to the required length

The scanning signal is transmitted over pin 9 of the RJ-45. Pin 9 exists in nine-position RJ-45 jack and plug designs, used for these patch panel models. A special patch cord -SMART Jumper, including an extra wire and special RJ-45 plugs is needed. Please refer to the PatchView System and the Copper Cables and Cords sections for further details.

 

Patching Switches
24 Patching Switches for internal inside patching. When patch cord is not inserted – each two upper and lower ports are connected. When patch cord is inserted - upper and lower ports are disconnected. Eight wires and the ninth scanning wire of each port are simultaneously switched. 

 

Indicators (in models adapted to PatchView only)
Port identification indicators - 48 red LEDs. Connected ports are identified by a pair of activated LEDs. A single port can be identified and the corresponding LED activated by a remote control command from the network management station.

 

 

Electrical Specifications

 

Category 6

 

Conforms to ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E.  
 
Electrical Specifications


SMART CLASSix 48 STP Patch Panel (with patching switches)

NEXT ratio plot is shown for worst pair. The following are typical NEXT measurement results at 100, 200 and 250 MHz for all pairs.

Pair (to all

NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
12-36 -60.21 -48 -48.67
12-45 -51.29 -46.62 -44.31
12-78 -60.39 -51.19 -47.2
36-45 -53.6 -49.05 -42.3
36-78 -51.77 -46.44 -46.32
45-78 -47.82 -44.15 -41.07

All pairs combinations exceed Category 6 requirements.

 

 

ELFEXT ratio plot is shown for worst pair. The following are typical ELFEXT measurement results at 100, 200 and 250 MHz for all pairs.
 

Pair (to all

ELFEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
12-36 -41.78 -32.95 -31.64
12-45 -40.55 -41.41 -28.51
12-78 -52.65 -24.51 -28.27
36-45 -36.5 -29.54 -28.16
36-78 -42.06 -36.24 -31.04
45-78 -43.51 -34.96 -35.15

All pairs combinations exceed Category 6 requirements.

 

Return Loss ratio plot is shown for worst pair. The following are typical Return Loss measurement results at 100, 200 and 250 MHz for all pairs.
 

Pair (to all

Return Loss (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -21.44 -16.66 -14.62
3-6 -19.62 -17.39 -15.98
4-5 -21.35 -16.38 -14.96
7-8 -18.71 -14.95 -13.61
All pairs exceed Category 6 requirements.

 

Insertion Loss ratio plot is shown for worst pair. The following are typical Insertion Loss measurement results at 100, 200 and 250 MHz for all pairs.


Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -16.07 -23.34 -25.76
3-6 -16.95 -24.32 -27.44
4-5 -16.88 -24.46 -27.16
7-8 -15.57 -22.42 -26.17
All pairs exceed Category 6 requirements.


 

Power Sum NEXT ratio plot is shown for worst pair combination. The following are typical Power Sum NEXT measurement results at 100, 200 and 250 MHz for all pair combinations.

Pair (to all

PowerSum NEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -50.31 -44.47 -41.57
3-6 -49.22 -43.82 -40.19
4-5 -45.48 -41.39 -37.59
7-8 -46.18 -41.63 -39.19

All pairs combinations exceed Category 6 requirements.


 

Power Sum ELFEXT ratio plot is shown for worst pair combination. The following are typical Power Sum ELFEXT measurement results at 100, 200 and 250 MHz for all pair combinations.

Pair (to all

PowerSum ELFEXT (dB)

other pairs) 100 MHz 200 MHz 250 MHz
1-2 -37.96 -23.86 -24.45
3-6 -34.53 -27.31 -25.23
4-5 -34.48 -28.23 -24.89
7-8 -39.5 -23.88 -25.88

All pairs combinations exceed Category 6 requirements.

 

 

General

 

Physical
Height: 88.10 mm / 1.76" (2U)
Width: 482.6 mm / 19"
Depth: 56.10 mm / 2.2"
Retention Fixture: 89.10 mm / 3.5"
Weight: 2.5 Kg


Material
Steel

 

Colors
Black background with gray silk screened markings 

 

Environment
Temperature:-20° to 60°C
Humidity: 0-90% non-condensing 

 

Compliance with International EMC Standards:
The SMART CLASSix UTP 48 line of patch panels is designed to comply with EN-55022, Class B (Europe) and FCC Part 15, Subpart J, Class A (USA).

Number Description

R3241014

SMART CLASSix STP Panel, 48, Switches, Cable Retention, PVMax

 

  


Contact Us

PVMax & EPV Connectivity Components:

Intelligent Patch Panels

Intelligent Cords & Jumpers 

 

About the PVMax IIM solution 

About the EPV IIM solution 

 

What is IIM

 

Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close

GUI: Grid_1.asp
close