Login
Close

Login



SMARTen UTP SMART ReView Jumpers


 

  • SMART ReView Jumpers are used in cross-connect PatchView applications

  • Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends with external nine-contact

  • Accommodate with either internal or external nine-pin connection

  • SMART ReView Jumpers feature non-molded flexible boot for superior cable bend radius

  • Anti-snag latch design

  • Conform to ANSI/TIA/EIA-568-B.2-10, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) standards for Category 6A/Class E

  • 100% tested at the factory

 

     

 


The SMARTen ReView UTP SMART Jumper conforms to ANSI/TIA/EIA-568-B.2-10, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) standards for Category 6A/CLASS EAwith enhanced transmission properties, supporting 10GBase-T and all other high bandwidth digital applications with low BER up to 500 MHZ bandwidth with enhanced transmission properties, supporting 10GBase-T and all other high bandwidth digital applications with low BER up to 500 MHZ bandwidth. Comprised of flexible jumper cable and terminating with two modular plugs. 

 

SMARTen U/FTP SMART Jumper Cable
The SMARTen U/FTP SMART Jumper Cable is a 100 ohm cable contains 4 Un-grounded Foiled Twisted Pairs (U/FTP), cabled and jacketed with a LSZH compound. An additional 26 AWG flexible, insulated conductor at the center of the cable serves as a control wire, which carries the PatchView scanning signal. In this way, scanning does not interfere with the data signal-carrying pairs.


 

SMARTen UTP Modular Plug
The SMARTen Plug is field-terminatable, with superior cable retention providing enhanced pull-strength and preventing pair deformation. The plug is designed to ensure precision wire placement, providing superior performance.  

 

With RiT's Precession Placement TechnologyTM (PPT), the SMARTen Plug ensures high-repeatability Cross-Talk performance, with both factory and field termination. PPT enables Category 6A performance under any field condition. 

 

The connectors have 9 contacts, and accommodate termination of 24 AWG stranded and 26 AWG solid and stranded conductors. In addition, there is a 9th contact for PV application which can accommodate the 26 AWG stranded wire.  


SMARTen U/FTP SMART Jumper Cable 

 

Construction  

  • Basic Wires
    Conductor: Eight wires, stranded bare copper, 7 x 0.16 mm (26 AWG)
    Insulation: skin foam skin, polyolefin

      
  • Control Wire
    Conductor: one wire, stranded bare copper, 7 x 0.16 mm (26 AWG) Insulation: solid polyolefin, 0.78±0.02mm outer diameter, colored red. 

      
  • Pair Construction
    Four pairs, each pair wrapped in polyester-aluminum foil (metal face inside), eliminating alien cross-talk 

  • Pair Color Codes (2 wires/pair)
    (as per IEC 60708-1)
    Blue/white, orange/white, green/white, brown/white. 

  • Overall Diameter
    6.0 mm nominal

      
  • Outer Sheath

LSZH
Low Smoke, Zero Halogen (LSZH) compound, colored light gray RAL 7032 with black printing.

  • Printing 

    LSZH
    RIT R3726020 SMARTen U/FTP UN-GROUNDED PATCH CABLE 100-ohm CATEGORY 6A / CLASS E(A) 4XF(2*26AWG) LSZH { } METER {Batch Number}

    PVC
    RIT R3266000 SMARTen U/FTP UN-GROUNDED PATCH CABLE 100-ohm CATEGORY 6A / CLASS E(A) 4XF(2*26AWG) PVC { } METER {Batch Number}

 

Electrical  

  • DC Resistance
    Max. 145 ohm/km at 20°C

      
  • Resistance Unbalance
    2% max. at 20°C

      
  • Mutual Capacitance
    43 pF/m nominal at 1 KHz

      
  • Capacitance Unbalance
    1500 pF/km max. at 1 KHz (wire to ground)

      
  • Impedance 
    100 ±15 ohm at 1 to 250 MHz

      
  • Voltage Rating
    30 V rms.

      
  • Dielectric Strength
    700 VAC/one minute

  • Transfer Impedance (Zt) (Shielding Effectiveness)
    5 m ohm/m max. at 1-30 MHz.

  • Velocity of Propagation
    77-80% nominal.

  • Propagation Delay
    5.0 nS/m max @ 500 MHz.

  • Propagation Delay Skew
    25 nS/100 m max @ 1-500 MHz

     

General  

  • Storage Temperature
    -30° to 70°C (22° to 158°F)

  • Operating Temperature
    -
    5°C to 50°C (23° to 122°F)

  • Flammability Test
    IEC 332-1 / UL 1581 VW-1

  • Weight
    43kg/km, nominal
    CLASSix UTP Modular Plug

 

SMARTen UTP Modular Plugs

 

Construction  

  • Plug Housing
    PC Resin UL-94V0

  • Contacts
    High grade copper alloy

  • Plating
    50 micro inch (1.27 micrometer) gold

 

Electrical  

  • Current/Voltage Rating
    1.5 Amps, 30 VAC / 56 VDC

  • Dielectric Withstanding
    1000 volts RMS, 1 min. (60Hz)

  • Insulation Resistance
    500 Megaohms 

 

 


Number

Description 

R3269200

SMARTen UTP SMART ReView Jumper, 2.0m

R3269300

SMARTen UTP SMART ReView Jumper, 3.0m 

R3269500

SMARTen UTP SMART ReView Jumper, 5.0m

R3269700

SMARTen UTP SMART ReView Jumper, 7.0m


Contact Us

PVMax & EPV Connectivity Components:

Intelligent Patch Panels

Intelligent Cords & Jumpers

 

About the PVMax IIM solution 

About the EPV IIM solution 

 

What is IIM

 

Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close

GUI: Grid_1.asp
close