Login
Close

Login



SMARTen Keystone HD STP Jack – Connecting Hardware

  • Slim design, support 48 keystones in 1U

  • Fully shielded molded jack

  • Certified by 3rd lab for connecting hardware C6A performance

  • Tool-less termination

  • Termination can be done using standard 110 Block termination and Krone
    tools

  • High performance supports Category 6A performance specifications up to 500 MHz

  • Conforms to Connecting Hardware requirements as per: ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (2007) for Category 6A/CLASS EA.

  • Supports solid or stranded Category 3 to Category 7A cables

  • Simple assembly and installation for reliable performanceCompatible with a variety of international faceplates and patch panels IEC 60603-7

 

RiT’s Keystone-Type HD Jacks are cost-effective building blocks for your cabling system. The jacks can be used with both communications outlets and patch panels to maximize the flexibility of your inventory.

 

Its design for supporting tool-less termination and common termination tool enable the installer to have the maximum assembly flexibility. Each HD keystone jack package contains two termination cups – supporting tool-less or tool termination.

By supporting high dense panels (48 ports in only 1U) this HD keystone jack is suitable for high density installation like in datacenters and a place where space constrains is needed.

 

RiT’s SMARTen HD Jack Confirms to ANSI/TIA-568-C.2, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (2007) for Category 6A/CLASS EA for connecting hardware performance.

This shielded HD keystone jack is compatible with a wide range of standard international faceplate and patch panels. The jacks support both solid and stranded cables. The jacks fit in standard IEC 60603-7 openings.

 

Important note:

This HD keystone is not compatible with the following products:

 

1. R3260081 SMART Keystone Panel, STP, 24, PVMax

2. R6011000 PatchView+ Copper 24 Frame

 

 

Electrical Specifications

 

Category 6A 

 

Standard

Performance Requirements

ANSI/TIA/EIA-568-C.2, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (200x) for Category 6A/CLASS EA

Meets all Connecting Hardware electrical performance, including Alien Cross-Talk

 

SMARTen Jacks

 

NEXT ratio plot is shown for worst pair combination – NEXT 12-36.

 

 

 

FEXT ratio plot is shown for worst pair combination – FEXT 36-45.

 

 

Return Loss ratio plot is shown for worst pair – RL 36.

 

 

 

 
Part Number Description

 R2800212


  SMARTen Keystone STP HD Jack – Connecting Hardware

 

 

 

Important Note:

This HD keystone is not compatible with the following products:

 

1. R3260081 SMART Keystone Panel, STP, 24, PVMax

2. R6011000 PatchView+ Copper 24 Frame

 

 

 


Contact Us

 

About RiT Cabling Solutions

 

RiT Copper Outlets:

SMARTen (CAT 6A)  

SMART CLASSix (CAT 6)

SMART Giga (CAT 5e)

 

Faceplates

 

RiT Fiber Cabling

 


 

   

 

R2800212
CAT6A STP HD
Keystone Jack
Installation Instructions

Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close