CenterMind P+ Switched PDU, 3-Phase

  • A Switched PDU provides an advanced solution for equipment racks and other Data Center applications with local and remote power monitoring and environmental monitoring via IP 

  • Embedded web server 

  • Power management including rebooting and turning ON and OFF each outlet 

  • Accurately measures Active Power, Apparent Power, Energy k-Wh, Power Capacity, Reactance, and Power Capacity Used using the network interface 

  • Two units can be daisy chained together. This enables using a single IP address for more than one unit 

  • Alerts can be sent via SNMP or by email if the defined thresholds are exceeded Includes a local LED input current monitoring for True RMS utilization per each branch circuit 

  • Includes a local LED input current monitoring for True RMS utilization per each branch circuit 

  • Supports up to two external Temp/Humidity sensors* 

  • A reliable and economical solution for enhanced power monitoring 

  • Zero U (vertical mounting) 

  • Provide both power distribution and Branch Circuit Protection 

  • 3-phase, Wye, 32A, 230/400Volt, 50/60Hz 

  • Input power cord: 10m long with IEC 60309 6Hr, 5-Pin, Red Plug suitable for 400V / 32A Wye Power 

  • Circuit breakers for Branch Circuit Protection 

  • Fully supported by RiT CenterMind software 

*Expansion model not supporting external sensors  

The CenterMind P+ Switched PDU provides reliable power distribution combined with local and remote power monitoring and environmental monitoring via an IP address. In addition, CenterMind P+ Switched PDU offers a reboot capability for a single outlet which can be used for remotely for rebooting and ON/OFF an ITE.’


Use the network interface to view the power consumption, along with environment conditions like temperature and humidity levels via a web browser. CenterMind P+ Smart PDU provides several methods of sending alerts when the defined thresholds are exceeded, including receiving SNMP–based alarms and email alerts. The CenterMind P+ Switched PDU can daisy chain two units together. The Expansion PDU uses a single IP address across different power circuits. 


The CenterMind P+ Switched PDU is fully compatible and automatically recognized using RiT’s comprehensive CenterMind software. CenterMind software offers a full DCIM solution including monitoring and management of power, environment, Intelligent Infrastructure using Active I maps and WhatIf capabilities to fully control your data center.


Input Feed 
  • IEC 60309, 6-Hr, Red Plug 3P + N + G Plug, 10 meters cord length  
  • Amperage

  • Voltage
    3-phase, Wye, 230/400V, 50/60Hz 

  • 24 Outlets 
    • 18 X IEC C13 

    • 6 X IEC C19 


IP Access & security 

  • Web Interface, 10/100 Base-T Ethernet 


  • SSLv3, SSHv2, Telnet, SNMPv2, FTP, SNTP, Syslog 

  • LDAPv3, LDAPS, TACACS+ and RS-232 access 


Branch Circuit Protection 

  • Meets UL 60950-1 requirements 

  • UL-489 rated circuit breakers 



  • Compatible with button and bracket mounting options for Vertical mounting – Zero U 

  • Dimensions
    1753 X 44.4 X 57mm (69.0 X 1.75 X 2.25 in.) 

  • Color


Safety Specifications 

  • cTUVus to UL60950-1: 2003

  • TUVGS to EN 60950-1:2001

  • CE 

  • FCC Class A, Part 15 

  • EMC – EN 55022 Class A, EN 55024, CISPR 22 Class A 


Number Description


CenterMind P+ Switched PDU with C13 X 18 & C19 X 6 Outlets, 3-Phase

R3466122 CenterMind P+ Switched PDU Expansion with C13 X 18 & C19 X 6 Outlets, 3-Phase

Contact Us


About the CenterMind DCIM Solution


CenterMind Power Monitoring Components: 

CenterMind P+ Basic PDU 24

CenterMind P+ Metered PDU 24 

CenterMind P+ Smart PDU 

CenterMind P+ Smart PDU, 3-Phase 

CenterMind P+ Switched PDU, 1-Phase 

CenterMind P+ Switched PDU, 3-Phase 


Additional CenterMind Components: 

CenterMind Power Monitoring 


What is DCIM 


Please fill in your details and our staff will contact you.
*Enter the below security code here