Login
Close

Login



PatchView+ Card

The PatchView+ Card is a pluggable device that supports physical network identification on

interconnect and cross-connect topologies.

 

It automatically detects and reads up to 24 smart ID devices present on each Copper Frame or Fiber Tray. 

 

 

 

 

Figure 1: PatchView+ Card

 

 

 

 

Figure 2: PatchView+ Card Installation 

 

The Card is fully protected against abnormal power conditions such as power surges, short circuits, and overpower that might occur when inserting or removing the Card under plug-and-play operation. 

 

The PatchView+ Card features:

  • Supports a unique ID for system-wide identification

  • Powered from the Collector through an RJ-45 8-wire shielded cord  

  • Supports LEDs on the RJ-45 jack for displaying its power and activity status

  • Connects to the Copper Frame or Fiber Tray

 

Frame Interfaces 

  • 60-pin edge connector

  • RJ-45 8-pin shielded connector

 

LED Indicators 

  • Link LED (Green): Shows the status of network connectivity at the port. When a network link is established on the port, the LED is lit green; otherwise, it is off.

  • Act (Activity) LED (Yellow): Shows the status of data transaction on the port.
    • When a network link is established on the port but there is no data transaction, the LED is lit amber.
    • When data transaction takes place on a port, the LED blinks amber.
    • When a network link is not established on the port, the LED is off.

 

Dimensions and Weight 

  • Height: 12 mm (0.5 in.)

  • Width: 35 mm (1.4 in.)

  • Depth: 88 mm (3.5 in.)

  • Weight: 70 grams (2.5 oz.)

 

Environmental Conditions 

  • Temperature: 0–500C (32–1220F)

  • Humidity: Up to 90% non-condensing

 

Number Description

R6200110

PatchView+ Card                                           

 


Contact Us
Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close