Login
Close

Login



CLASSix UTP SMART ReView Jumpers


 

  • SMART ReView Jumpers are used in cross-connect PatchView applications

  • Comprise a length of nine-wire flexible jumper cable, terminated with two ten-position RJ-45 plugs at the ends with external nine-contact

  • Accommodate with either internal or external nine-pin connection

  • SMART ReView Jumpers feature non-molded flexible boot for superior cable bend radius

  • Anti-snag latch design
  • Conform to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E

  • 100% tested at the factory

 

     

 


The CLASSix SMART Jumper conforms to ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition (2002) and CENELEC EN50173 (2002) for Category 6/Class E and is designed for high-speed applications such as ATM 622 Mbps, Gigabit Ethernet 1000 Mbps and future high-speed applications. Comprised of flexible jumper cable and terminating with two modular plugs.     

 

CLASSix UTP SMART Jumper Cable
The CLASSix UTP SMART Jumper Cable is a 100  cable for indoor installations. The cable is housed in a blue PVC jacket and includes four twisted pairs. An additional 26 AWG flexible, insulated conductor at the center of the cable serves as a control wire, which carries the PatchView scanning signal. In this way, scanning does not interfere with the data signal-carrying pairs. and At the heart of the RiT CLASSix Cabling System, the CLASSix Modular Plug is a Category 6 compliant RJ-45 plug designed with the newest generation of high-speed applications in mind 

 

CLASSix UTP Modular Plug
The CLASSix Plug is field-terminatable, with superior cable retention providing enhanced pull-strength and preventing pair deformation. The plug is designed to ensure precision wire placement, providing superior performance.  

 

With RiT's Precession Placement TechnologyTM (PPT), the CLASSix Plug ensures high-repeatability Cross-Talk performance, with both factory and field termination. PPT enables Category 6 performance under any field condition.  

The connectors have 8 contacts, and accommodate termination of 24 AWG and 26 AWG solid and stranded conductors. In addition, a 9th contact for PatchView applications accommodates with 26 AWG stranded wire  


CLASSix UTP SMART Jumper Cable 

 

Construction  

  • Basic Wires
    Conductor: eight wires, stranded bare copper, 7 x 0.20 mm (24 AWG)
    Insulation: solid polyolefin, 0.97±0.02 mm diameter

      
  • Control Wire
    Conductor: one wire, stranded bare copper, 7 x 0.16 mm (26 AWG) Insulation: solid
    Insulation: 0.78±0.01 mm diameter

      
  • Pair Construction
    Four pairs cabled together, over a precision cross-shaped pair organizer

  • Pair Color Codes (2 wires/pair)
    Blue/white-blue, orange/white-orange, green/white-green, brown/white-brown 

  • Overall Diameter
    6.5 [mm] nominal

      
  • Outer Sheath
    Soft PVC compound, colored blue RAL 5015, with black printing

  • Printing 
    RiT R3228000 CLASSix UTP SMART JUMPER CABLE 100 OHM CATEGORY 6 4x2x24AWG + 1X26AWG UTP [ ] METER [+Batch No.]

 

Electrical  

  • DC Resistance
    Max. 96 ohm/km at 20°C

      
  • Resistance Unbalance
    3% max. at 20°C

      
  • Mutual Capacitance
    47±4 pF/m nominal at 1 KHz

      
  • Capacitance Unbalance
    3300 pF/km max. at 1 KHz (wire to ground)

      
  • Impedance 
    100 ±15 ohm at 1 to 100 MHz

      
  • Voltage Rating
    230 V rms.

      
  • Dielectric Strength
    700 VAC/one minute 

      
  • Propagation Delay
    5.3 nS/m max @ 1 MHz
    5.2 nS/m max @ 10 MHz
    5.2 nS/m max @ 100 MHz

  • Propagation Delay Skew
    45 nS/100 m max @ 1-250 MHz

General  

  • Operating Temperature
    -20° to 60°C (-4° to 140°F)

  • Flammability Test
    IEC 332-1 / UL 1581 VW-1

  • Weight
    39 kg/km, nominal

CLASSix UTP Modular Plug 

 

Construction  

  • Plug Housing
    PC Resin UL-94V0

  • Contacts
    High grade copper alloy

  • Plating
    50 micro inch (1.27 micrometer) gold

 

Electrical  

  • Current/Voltage Rating
    1.5 Amps, 30 VAC / 56 VDC

  • Dielectric Withstanding
    1000 volts RMS, 1 min. (60Hz)

  • Insulation Resistance
    500 Megaohms 

 

 


Number

Description 

R3282100

CLASSix UTP SMART ReView Jumper, 1.0m

R3282150

CLASSix UTP SMART ReView Jumper, 1.5m

R3282200

CLASSix UTP SMART ReView Jumper, 2.0m

R3282300

CLASSix UTP SMART ReView Jumper, 3.0m

R3282500

CLASSix UTP SMART ReView Jumper, 5.0m

R3282600

CLASSix UTP SMART ReView Jumper, 6.0m


Contact Us

PVMax & EPV Connectivity Components:

Intelligent Patch Panels

Intelligent Cords & Jumpers

 

About the PVMax IIM solution 

About the EPV IIM solution 

 

What is IIM

 

Please fill in your details and our staff will contact you.
*
*
*
*
*
*
*Required
*Enter the below security code here

Refresh
Close

GUI: Grid_1.asp
close