R6122XXX - PatchView+ Cord, Cat. 6A, S/FTP, Cross-Connect

Datasheet

Installation Instruction

• Copper cords jumpers for PatchView+ cross-connect applications
• Comprise of 8-wires Category6A S/FTP flexible patch cable, terminated with two fully shielded RJ-45 plugs at each end with two external ID contacts
• Non-molded fle xible boot for enhanced life and reliability
• Conform to ANSI/TIA-568-C.2, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (2007) standards for Category 6A/CLASS EA
• 100% tested at the factory
• 
  
• 
  

R61110XX - PatchView+ Jumper, Cat6A, S/FTP, Inter-Connect

Datasheet

Installation Instruction

• Copper cords jumpers for PatchView+ Inter-connect applications 
• Comprise of 8 data-wires Category6A S/FTP flexible patch cable + 2 control wires, terminated with two fully shielded RJ-45 plugs at each end with two external ID contacts 
• Non-molded flexible boot for enhanced life and reliability 
• Conform to ANSI/TIA-568-C.2, ISO/IEC 11801 2.1 edition and CENELEC EN50173 (2007) standards for Category 6A/CLASS EA
• Backward compatible with Category 5e and 6 – UTP and STP 
• ID key is sold separately 
• 100% tested at the factory
• 
  

R6135XXX - PatchView+ Cord, LC, OM4, Cross-Connect

Datasheet

R6136XXX - PatchView+ Cord, LC, SM, Cross-Connect

Datasheet

• Designed for PatchView+ application and as stand-alone cord 
• Comprised of two 0.6 mm LS0H tight buffer fibers cable 
• Available with two fiber types – Single-Mode and Multi-Mode 50/125 OM4 
• Multi-Mode models are colored White and Single-Mode models are colored Blue
• 
  

R6131XXX - PatchView+ Jumper, LC, OM4, Inter-Connect

Datasheet

R6132XXX - PatchView+ Jumper, LC, SM, Inter-Connect

Datasheet

• Designed for PatchView+ application and as stand-alone cord 
• Comprised of two 0.6 mm LS0H tight buffer fibers cable with two control 28AWG wires 
• Available with two fiber types – Single-Mode and Multi-Mode 50/125 OM4 
• Multi-Mode models are colored Aqua and Single-Mode models are colored Yellow
• 
  

R6137XXX - PatchView+ Jumper, MPO, OM4

Datasheet

R6138XXX - PatchView+ Jumper,
MPO, SM

Datasheet

• Designed for PatchView+ applications
• Connectors are compliant with FOCIS-5D standard
• Fully compatible with 40G and 100G* IEEE 802.3 applications
• The Jumpers are comprised of 12 tight buffer fibers 
• Multi-Mode models are provided with an Aqua colored cable and Single-Mode models are colored Yellow
• Available in several lengths
  
  

* For 100G applications two cords may be in use